How to Clean and Care for Your Tatum Sconce

Quick Answer

Dust your Tatum Sconce weekly with a soft, dry cloth. For deeper cleaning, wipe the brass arm and shade with a slightly damp microfiber cloth, then dry immediately. Avoid harsh chemicals or abrasive pads.

Step-by-Step Cleaning and Care Routine

1. Step 1: Turn Off Power and Let the Bulb Cool: Switch off the wall switch or circuit breaker for the sconce. Wait at least 15 minutes for the included LED bulb and the brass shade to cool completely before touching them. Cleaning a hot bulb can cause it to break or shorten its lifespan.
2. Step 2: Dust the Shade and Arm with a Dry Cloth: Use a soft, lint-free microfiber cloth to gently wipe the entire sconce, starting from the top of the shade and moving down the arm. This removes loose dust and prevents it from turning into a smudge when you use a damp cloth. A dry cloth first prevents scratching the brass finish with grit.
3. Step 3: Dampen a Cloth for Fingerprints and Smudges: Lightly dampen a clean microfiber cloth with distilled water. Wring it out so it is barely damp. Gently wipe the brass arm and shade in a straight motion, following the grain of the metal. Dry immediately with a separate dry cloth to avoid water spots. Never spray water directly on the sconce; moisture can seep into the electrical components.
4. Step 4: Clean the Bulb and Socket Area (If Needed): If dust has collected on the LED bulb or inside the socket area, use a dry paintbrush or a clean, dry cloth to remove it. Do not use any liquids near the socket. Moisture near the socket can cause a short circuit or corrosion.
5. Step 5: Polish the Brass (Optional, for Extra Shine): If the brass looks dull, apply a small amount of a brass-specific polish (like Brasso) to a soft cloth and rub gently in circular motions. Buff with a clean, dry cloth. Test on a hidden area first, and avoid getting polish on the wall or the bulb. Over-polishing can remove the protective lacquer on some brass finishes.

Product Facts

• Tatum Sconce: The Tatum sconce has a solid brass arm and a lathe-spun solid brass shade. Brass is durable but can scratch easily, so always use a soft cloth and avoid abrasive cleaners.