What the Tatum actually is
The Tatum Chandelier is a three-arm fixture with lathe-spun solid brass shades. That is the whole design story, and it matters more than any trend label: three shades spread light in three directions rather than pooling it in one spot. The catalog describes it as suited to round, square and rectangular tables, or to use in multiples above longer tables and kitchen islands.
Two practical facts shape every decision below. First, the Tatum is hardwired, and professional installation is advised. Second, it comes in twelve drop lengths from 16" to 38" in Modern Brass, so the length you order is fixed at purchase rather than adjusted on site. Down rod extensions are available, but they must be ordered at the same time as the fixture so it is made with enough wire to accommodate the extension.
Specs that affect your buying decision
- Tatum Chandelier: 3 arms with lathe-spun solid brass shades Three separate shades give a wider spread of light than a single-shade pendant, which suits a table or island rather than a single reading spot.

Tatum Chandelier - Tatum Chandelier: 6 watt 2700K LED bulbs included Warm 2700K light is the usual choice for dining and living spaces, and bulbs are supplied so you can plan the finished look before installation.
- Tatum Chandelier: Medium (E26) based lamp sockets; 60 watt per socket max If you later swap the included LEDs, you know the socket type and the ceiling on wattage per socket.
- Tatum Chandelier: UL listed for dry locations, indoor use This rules out bathrooms, covered porches and other damp or wet spots, so it belongs in dining rooms, kitchens and living areas.
- Tatum Chandelier: Hardwired; professional installation advised Budget for an electrician and confirm your ceiling has a suitable junction box before you order.
Choosing a drop length before you order
The drop length is the one choice you cannot easily change later. Because extensions must be ordered with the fixture, the safest approach is to measure your ceiling height and your table or island surface first, then pick the drop length that lands the fixture at the height you want, and add any extension to the same order.
The catalog does not publish a recommended hanging height for the Tatum, so treat any figure you see elsewhere as general guidance rather than a manufacturer instruction. If you are unsure, measure twice and ask your installer to confirm before placing the order. The catalog also points readers to its Size and Placement guide, which is the right place to check fit for your specific room.
Where the Tatum fits best
- Dining tables: The catalog names round, square and rectangular tables as suitable. Three arms spread light across a table rather than concentrating it in the center.
- Kitchen islands: The catalog suggests using the Tatum in multiples above longer tables and kitchen islands. Plan the number of fixtures and their spacing together, not one at a time.
- Living rooms: A three-arm brass fixture can work as a central living room light, but the catalog does not make a specific living room claim. Judge it on your ceiling height and the drop length you choose.
- Not for damp or wet rooms: The fixture is UL listed for dry, indoor locations only, so bathrooms and covered outdoor areas are out.
The trade-offs worth knowing
The fixed drop length is the biggest constraint. A fixture ordered at the wrong length means a return or a new extension order, so measure carefully and order any extension at the same time. Hardwiring also means this is not a plug-in fixture you can move between rooms on a whim.
The upside is a simple, honest design: solid brass shades, included warm LEDs and a standard E26 socket that gives you flexibility later. It is designed and assembled in Houston, TX, which matters if you prefer a fixture with a traceable origin.
The catalog price is USD 1178.53 against a comparison price of USD 1759.00. Treat that as the current listed figure rather than a permanent discount.
A simple way to decide
- 1. Confirm the room type: Dry, indoor spaces only. Dining room, kitchen or living room are the natural fits.
- 2. Measure ceiling height and surface height: Use these two numbers to choose a drop length from the twelve available options.
- 3. Decide on multiples: For a long table or island, plan how many Tatum fixtures you want and space them as a set.
- 4. Add any extension to the same order: Extensions must be ordered with the fixture so it is made with enough wire.
- 5. Book an electrician: The Tatum is hardwired and professional installation is advised.


