Ferris 5 Chandelier: Dining Room Lighting Tips

Quick answer

For a dining room, hang the Ferris 5 chandelier 30-34 inches above your table, center it over the table, and choose a drop length that keeps the globes at eye level when seated.

Step-by-step installation and styling guide

1. Measure your table width: The chandelier should be no wider than two-thirds of your table’s width. For a standard 36-inch-wide table, aim for a fixture around 24 inches wide. The Ferris 5’s globe span fits most dining tables up to 48 inches wide. If your table is narrower than 30 inches, consider a smaller fixture to avoid overcrowding.
2. Set the hanging height: Position the bottom of the chandelier 30 to 34 inches above the table surface. Measure from the tabletop to the lowest point of the fixture. This height keeps the globes out of sightlines while seated and prevents glare. Common mistake: hanging too high (above 36 inches) reduces the intimate glow; too low (under 28 inches) can block views across the table.
3. Select the right drop length: The Ferris 5 offers drop length options during ordering. Choose a length that places the chandelier at the correct height without excess chain or rod. For standard 8-foot ceilings, a 12- to 18-inch drop typically works. For taller ceilings, you may need a longer drop. Check the available drop lengths before ordering; if none match your ceiling height, plan to have an electrician adjust the wiring or use a swivel adapter.
4. Center over the table, not the room: Mount the chandelier directly above the center of the dining table, not the center of the room. This keeps the light focused on the table surface and avoids casting shadows on seated guests. If your table is pushed against a wall or in a corner, shift the fixture to stay centered over the table—even if that means it’s off-center from the ceiling.
5. Choose the right bulbs: Use candelabra (E12) base bulbs rated at 40 watts or less. For a warm, inviting glow, pick LED bulbs with a color temperature of 2700K to 3000K. Dimmable LEDs let you adjust brightness for meals or entertaining. Avoid bulbs larger than the glass globes; check the globe dimensions before buying to ensure a snug fit.

Product facts

• Ferris 5 Chandelier: The Ferris 5 chandelier uses five candelabra (E12) sockets, each rated for up to 40 watts, and is UL listed for dry indoor locations. This means you can choose warm dimmable LED bulbs to control brightness and ambiance without exceeding the wattage limit.