Straight Arm Peak Sconce: Hallway and Entryway Placement Guide

Quick Answer

For most hallways and entryways, mount the Straight Arm Peak Sconce so the center sits 60–66 inches from the floor, and space fixtures 6–8 feet apart for even, directional light.

Step-by-Step Placement and Installation

1. Determine the mounting height: Measure from the finished floor to the center of the sconce. For hallways and entryways, aim for 60–66 inches. This height works well for most people and provides comfortable, non-glaring light. Common mistake: mounting too high or too low can cause glare or poor illumination—double-check your measurement before marking.
2. Plan the spacing between fixtures: If installing multiple sconces along a hallway, space them 6–8 feet apart. This ensures even light distribution and avoids dark spots. For a single sconce, center it on the wall or align it with a focal point like a console table. Checkpoint: use a laser level or chalk line to keep the fixtures perfectly aligned horizontally.
3. Position relative to doors and corners: Keep at least 6 inches of clearance from door frames and corners to prevent the sconce from feeling cramped. In entryways, place the sconce near the door or mirror to create a welcoming glow. Common mistake: placing a sconce too close to a door can cause it to be bumped or obstructed—measure clearance carefully.
4. Consider the light direction: The Peak shade directs light downward, so aim the sconce toward the area you want to illuminate—like a path or a piece of art. For reading nooks or vanities, adjust the height to 66 inches for better task lighting. Checkpoint: test the light angle with a temporary mount before finalizing to ensure it highlights the intended area.
5. Turn off power and install the sconce: Before installation, turn off the circuit breaker. Follow the manufacturer’s wiring instructions, connecting the fixture to the junction box. Secure the sconce to the wall and install the included LED bulb. Common mistake: forgetting to turn off power can be dangerous—always double-check the breaker is off.
6. Test and adjust the fixture: After installation, turn the power back on and test the sconce. If the light is too bright or dim, check the bulb and dimmer compatibility. Adjust the angle if the shade is adjustable. Checkpoint: ensure the sconce is securely mounted and level before finalizing the installation.

Product Facts

• Straight Arm Peak Sconce: The Straight Arm Peak Sconce is hardwired and includes a 6W 2700K LED bulb, with a 120V 60W max socket and E26 base. This means you get a warm, energy-efficient light right out of the box, and the hardwired design ensures a clean, permanent installation.